A family roofing company serving Allensville and the rest of Pennsylvania through our network of local crews. Tin roofs, repairs and replacements done right.
Pick a service to see how we handle it and what the job usually looks like on a Allensville roof.
A skylight has to be woven into the roof, not caulked to it. That is the difference between a fix that lasts a season and one that holds.
Inspections come free with an estimate. We would rather find the small problem this spring than replace a ceiling for you next winter.
We repair standing seam, exposed fastener panels and metal shingles, and we match the color as closely as the paint system will allow.
If two other people have caulked it and it still leaks, call us. Most stubborn leaks turn out to be flashing, a valley, or a fastener nobody thought to check.
Most roofs somebody has called a lost cause are not one. We repair what can be repaired, and we tell you honestly when a repair will no longer hold.
Temporary cover goes on fast, then we come back and make the permanent repair once we can see properly what we are working with.
Missing shingles get matched as close as weathering allows. Loose metal gets new fasteners and washers, and the eaves, rakes and ridge get sealed back up tight.
We work around your hours, weekends included when that is what it takes to keep your doors open while the roof goes on.
After a storm we walk the roof, photograph everything we find, and write an itemized estimate you can hand straight to your adjuster.
Guards installed as part of a roof job or on their own. Either way we check the hangers and the pitch while we are up there.
Full tear off, decking checked board by board, then a new metal or shingle roof over proper underlayment. You get the price and the start date before anything comes off.
Waterproofing details on additions, porches and low slope tie ins, where two roofs meet and most leaks quietly begin.
Coatings for low slope and older metal roofs that are still sound but weathered. Washed down, refastened, primed at the rust, then coated.
Removing the ice is the easy half. We also look at ventilation and insulation so it stops happening every January.
Low slope roofs fail at the joints and around anything that sticks through them. That is where we start, not out in the middle of the field.
The edge of a roof is where most trouble starts. New fascia, new soffit, wrapped or painted so it stays sound.
Standing seam and metal panel roofs, measured and cut on site. We help you settle on a color, set the panels straight, and trim the ridge and valleys so the whole roof sheds water the way it should.
Hail bruises shingles and dents the softer metal on vents, valleys and gutters. We show you what we find and document it properly for the claim.
Careful footwork, matched materials, and flashing done the way it was done when the roof went on.
We still shingle plenty of roofs. Cracked, curled and blown off shingles get replaced, and the valleys and flashing get reworked while we are up there.
Roofing Brothers began in 2002 as a family roofing company in Morganton, North Carolina, and it is still run the way it started. Homeowners in Allensville reach that same outfit — the one that has been setting metal panels and laying shingles for over twenty years — through our network of local crews.
In a city the size of Allensville, word travels fast about who does good work and who does not. That suits us fine. We would rather put one roof on right and have the neighbors ask about it than chase volume all over Pennsylvania.
Nothing fancy — free estimates, honest answers, and roofs that go on straight.
The same family started this company putting metal roofs on neighbors houses in 2002. It has never been sold, franchised or handed off to a call center.
Somebody comes out, measures, gets on the roof, and leaves you a written price. No charge, no obligation, and no number that expires if you do not sign today.
Around twenty standard metal colors, and the chart comes out with the estimate so you can hold it up against your siding and shutters before you commit.
You get a start date and we hold to it. If weather moves your job we call you, rather than leaving you watching the driveway.
If your roof needs a repair and not a replacement, we say so. Plenty of our best customers are people we talked out of a job they did not need yet.
Common questions from Allensville, PA homeowners about metal roofs, repairs and what a roof costs.
No. Estimates are always free in Allensville. We come out, measure, look in the attic if we can get to it, and leave you a written price. Nobody will push you to sign anything that day, and the number does not expire in an hour.
Most Allensville metal roof jobs land somewhere between about $12,000 and $30,000 in 2026, depending on square footage, pitch, panel type and how much tear off there is. Standing seam runs higher than exposed fastener panels. We measure before we quote, and the estimate is free.
Often, yes. Plenty of the Allensville roofs we get called to look at need flashing reworked or a section refastened, not a whole new roof. We will tell you honestly which one you are looking at, and if it is repairable we would rather repair it.
Yes. Gutters, guards, soffit and fascia are all part of keeping the edge of a Allensville roof dry, so we handle them along with the roof instead of sending you off to find somebody else to finish the job.
We do. After a storm we photograph the damage on your Allensville roof and write an itemized estimate you can hand to your adjuster. We do not file the claim for you and we will not promise you what an adjuster is going to approve — that is their call, not ours.
A typical Allensville shingle roof runs roughly $8,000 to $18,000 in 2026 for an average single family home, and more if the deck has rot or the roof is steep and cut up with dormers. We do not price off a satellite photo — somebody comes out and measures.
We would rather let the work, and the people who paid for it, do the talking.
"New gutters and guards after they did our roof. No more climbing up there every October to dig out pine needles by hand."
"Thank you so much to the entire crew at Roofing Brothers for our amazing new tin roof! You were amazing to work with and I couldn't recommend you to others enough! Great communication, pricing, color options, efficiency, and HONESTY! If anyone needs a new roof, I highly recommend this crew! Phenomenal job."
"Standing seam on our log home. The panels are dead straight and the ridge work is clean. You can tell they have done a few of these."
Looking for a roofer just outside Allensville? These areas are covered too.